Elephone S3 flash sale

OEM Smartphone / White-label Phone

Start your own smartphone company in partnership with our white-label phone solution

Photive BTH3 BT Headsets Guide

Share This:

Photive BTH3 BT Headsets Guide

Quality Of Sound

Both of The Photive BTH3 and BTX6 employ 40 millimeter drivers, though listening for a matter of moments makes it clear that these do not work with the same 40 mm drivers. The sonic signature of every pair of headphones is significantly distinct from the other, and is apparently focused towards several types of customers.


Throughout testing the BTH3 I listened to both a mobile phone (a Motorola Moto X) connected via Bluetooth, and to lossless FLAC audio files and CDs using the 3.5 mm audio cable, plugged into a desktop using a Focusrite Saffire Pro 40 audio interface. As always, I enjoyed music of all sorts of musical genres, and a small amount of podcasts and an audio book.


The highs are crystal-clear and crisp, virtually to a fault. The highs aren’t far too accentuated, but there is a crispy sort of sizzle to the highs that isn’t always obvious, but was recognizable on a few music.


The mids are clean and clear, with no marginally boxy sound that is so present in single-driver headsets in this price bracket. There’s an apparent slight boost round the 1 kHz range, that’s apparently there to give vocals a little boost. It is slight enough to not be ridiculous, and doesn’t negatively modify the sound.

Unlike the Photive BTX6 headsets and their X-Bass branding, the bass is not overpowering or strongly emphasised in the BTH3. It is not lacking or thin-sounding either – it’s simply not clearly boosted as with the BTX3. Bass response is a bit on the slow side, so a small lack of tight focus can pop up in a few sorts of music, with fast metal or punk as the notable instances here.

Soundstage was shockingly decent for closed-back earphones, regardless if using them by Bluetooth. I realize Bluetooth sound made a great progress , however, this still stunned me a little bit. As a whole, it is a well-balanced and very good sounding pair of earphones, and I really favored the sound of the BTH3 to the less affordable BTX6, even though I’m uncertain that this view is going to be shared.

Build & Design

Perhaps you might imagine, with the Photive BTH3 being the less pricey of these two, these earphones are certainly not as showy looking as the BTX6. Whether it is a negative thing is fairly your decision. They’re most certainly not an unsightly pair of headphones, and while they do not have the bold shape as well as much more style-focused design of the BTX6, they’re furthermore not almost as creepy looking. These are additionally on the slimmer side, in contrast to the larger BTX6.
This is a considerably comfortable pair of headphones. It could be short of the a little puffier ear cushions of its higher priced sister, but because they are also more lightweight, too much cushioning isn’t actually obligatory. After round two hrs of usage, I indeed can feel that I was putting on headsets – these don’t go away the manner pricier earphones like Bose’s SoundTrues do – nonetheless they didn’t feel bothersome or especially not comfortable, even after that long. Possibly mainly because that they aren’t foldable, the BTH3 are more adjustable than the BTX6 earphones. The ear cups rotate quite a lot, and combined with the adjustable headpiece, it’s very easy to find a good fit with these headsets.

Do not worry about carrying these around with you as well. Though they aren’t foldable, they feature a hardshell case which isn’t all that much larger than the headphones themselves, and so you will have the ability to easily have them sheltered. This is nice to see, as we’ve known significantly more pricey headphones offer only a soft case, or no case at all.

Connectivity Options

Pairing the Photive BTH3 headphones with the gadget that you choose is a fairly effortless process. Even if these don’t feature the voice guidelines and cues that the BTX6 do, the flashing light on the side of the left ear cup is plenty of a cue to make it simple to figure out that they automatically start out broadcasting the instant you turn them on. Strangely enough, this pair of headsets carries a specific power switch and standalone play/pause button, not like the multi-function key used on loads of headsets

As for buttons, the BTH3 headphones are an excellent source of them. The left earcup holds the above mentioned play/pause button and also the forward / skip and rewind / back buttons. The right ear-cup holds the power key and furthermore dedicated volume level control buttons. All over Again, some people might possibly hesitate at the sheer quantity of keys right here, but I found it relaxing to have some much control made available. In comparison to some earphones, all the control keys worked well with my Moto X while in testing.

Chipsetter ONE: Desk Pick-And-Place Device

Share This:

Chipsetter ONE: Desk Pick-And-Place Device

Play the video media down below to read more about this unique assembly equipment that’s suitable for any workshop surroundings.

Needlessly to say Chipsetter has offered a whole new desktop pick-and-place system via the Kickstarter crowdfunding online site with the attempt of obtaining CAD $140,000 during the coming 1 month.

The Chipsetter desktop system has been produced to deliver builders, makers and hobbyists with a well-performing and acceptable desktop pick-and-place device, which enables you to build your own PCB prototypes.

With your own PCB assembly system you will be able to convey your personal designs to marketplace a lot faster, maybe even carry out small production runs.

Few aspects of circuit board development are as boring as locating electronics components skillfully by hand. Suppliers can certainly assemble small batches, however , will invest 2 weeks to 30 days and $1000 on every design cycle.

Enlightened by desktop 3D printing tech, we started design a effective and competitively priced tool. We was aware that to be practical it would have to really save you effort and time. To accomplish that, our solution must be fairly effective, and we would be required to get rid of the setup time difficulty.

We started this project after assembling a number of PCBs within the last few 10 years. Lowering SMT equipment dimensions, along with new access to reasonable prototype PCB fabrication services shown we were developing even more circuit boards than in the past, and continually enduring the soreness of manually operated assembly. Our questionnaire of accessible solutions exposed present desktop machine was either very costly, or unstable. We wanted something far better, and we learned all the electronics developers just like us desired it as well. Hence we decided to find a solution.
When other solutions have moved away from single tape feeders in favour of arrays of tape slots, many customers have complained at how tricky this has made it to setup and change over jobs. We proceeded to chase an affordable feeder solution, which required our staff to design an inexpensive detachable electronic feeder system from the start. It is our target to enable people who own the Chipsetter ONE to possess a enough amount of feeders to put a finish to time wasted switching tape between feeders during a change-over. Chipsetter Tape Feeders can be easily stuffed and unloaded from the Chipsetter ONE, making mechanical and electrical connections in one quick motion.

SolidWorks 2017 possesses lots of additional features and improvements

Share This:

SolidWorks 2017 possesses lots of additional features and improvements

Dassault Systemes just published the newest version of its computer aided design (CAD) and computer-aided engineering (CAE) collection, SolidWorks 2017.

By using SolidWorks 2017, Dassault Systemes has created at least 250 new augmentations in accordance with comments from customers and has added a different application directly into the suite termed SolidWorks PCB.

Between the fresh tweaks to SolidWorks 2017 is a function termed 3D Interconnect, allowing data files generated in similar CAD/CAE software packages to be read and revised in SolidWorks.

Such 3D models created in some other CAD computer program suite can be altered and added to any other 3 dimensional models created in SolidWorks.

Dependant on Ba-Thong Phan, Dassault Systemes senior technical director, SolidWorks 2017 can read and modify files generated by five of the primary famous platforms.

An additional latest feature in SolidWorks 2017 is Magnetic Mate, which permits people to compose items which can “snap” together once the user drags one nearby another – this feature, enabling the customer to specify what areas are able to snap with each other and at which connection , allows for less complicated component layouts.

SolidWorks PCB is a new add-on to the software suite and allows for built-in printed circuit board design that may be designed in tandem with the other hardware parts.

SolidWorks is amongst the most popular CAD/CAE software suites in today’s world, with clients that involve the aerospace industry, transporting, consumer goods and there are others.

As outlined by Benjamin Tan, overseer of sales for Dassault Systemes, 80 % of the up-market Swiss Watch manufacturers apply SolidWorks to help with the design and developing of high quality watches.

In Malaysia only, SolidWorks obtains over 1,000 customers, including nationwide car producer Proton, dependant on Tan.

Dassault Systemes is now offering term licensing of SolidWorks combined with its traditional constant license choice.

Tan states that term licensing costs roughly US$300 (about RM1,200) for each one-quarter whilst constant licenses charges from between US$8,000 to US$15,000 (about RM32,0000 to RM60,000).

Zentech improves knowledge of board design and contract assembly with IDS investment

Share This:

Zentech improves knowledge of board design and contract assembly with IDS investment

Managers of contract manufacturing expert Zentech Manufacturing Inc. Windsor Mill, Md., are improving their company’s understanding of printed circuit board design and instant prototyping with their paying for Interconnect Design Solutions (IDS) LLC in Mount Pleasant. Terms of the deal weren’t publicized.

IDS is targeted on PWB (printed wiring board) design, mechanical engineering, swift prototyping, and commitment making. The company has extraordinary skills in printed wiring board and mechanical engineering consulting and advice for aerospace, automotive, telecommunications, and electronic devices applications.

Zentech is an rising electronics contract manufacturing supplier which specializes in PCB construction, testing, and design and development services. The small business firstly offers the defense, aerospace, hospital instruments, industrial controls, computer, and telecommunications markets.

Last May, Zentech acquired contract company Colonial Assembly and Design LLC in Fredericksburg, and the IDS purchase moreover adds to its engineering services competency.
“The acquisition of IDS, plus the May 2015 purchasing Colonial Assembly and Design LLC and Zentech’s powerful capabilities, brings great engineering services ability, with quite a few Zentech design centers presently intentionally located across our important Eastern Seaboard sector,” states the President and CEO Matt Turpin.


EMS and PCB Fields Return to Expansion

Share This:

EMS and PCB Fields Return to Expansion

Industrial and fabricating companies are watching beneficial trends. In response to IPC, PCB and EMS markets in Canada And America prolonged to claim encouraging expansion over the summer of 2016. The statistics depends upon three-month rolling averages.

Semiconductor manufacturers have already been struggling with a rough span, however , data proposed by IPC implies that the recovery for semi-conductor shipments commenced in April 2016, with optimistic signs of recovery. Seeing as purchases in the PCB and EMS industries grew, companies in general believed the positive traction.

Small cap firms such as Cemtrex Inc. have achieved positive results quite a lot from the restoration in the PCB industry. Cemtrex provides PCB assembly services in addition to instruments for producing processes, and industrial environmental control systems. During the early August, the company proclaimed that net sales for the three months ended June 30, 2016 raised by 69% to $24.7 million from $14.67 million for the three months ended June 30, 2015. Shares of the company since early May have more than doubled.

Just recently, Cemtrex has been energetic in expanding operations across the world . Earlier this month, the firm declared that it has totally incorporated with the freshly bought Periscope, an electronics manufacturing company based in Paderborn, Germany. With the integration concluded , Cemtrex secured a wider base and bigger market share in the Eurozone and says that it is currently one of the top 20 EMS vendors in Germany.

Larger cap suppliers like Intel and Advanced Micro Devices have both been recuperating from a stable at best in 2015. Shares of Intel and AMD increased by up to 25% and 65%, respectively, ever since May.

Intel has found it necessary to lift its portfolio of products to request a bigger variety of devices, and in recent times acquired Movidius Technology. Movidius is an expert in innovative devices that happen to be breaking into the best-selling similar to drones, virtual reality headsets and more.

Texas Instruments Inc. performs a top role in the PCB business, being a international semiconductor firm operating in 35 across the world. TI fabricates communication equipment, business venture systems, in addition to hardware for industrial purposes and consumer electronics. Shares increased 22% from May.

QUALCOMM is more renowned for development and commercialization of hardwarehardware, designing PCB for digital communication technologies. The enterprise furthermore develops and commercializes an assortment of other technologies employed in cell phones and tablet computers. Shares of QUALCOMM went up by around 25% from May.

Circuit Card Assembly Meaning and Service Vendors

Share This:

What is Circuit Card Assembly (CCA)?

When the board doesn’t have any inserted components it is more adequately called as a printed wiring board (PWB) or etched wiring board. Even so, the name printed wiring board has fallen into disuse. A PCB populated with electronic parts is labeled as a printed circuit assembly (PCA), printed circuit board assembly or perhaps PCB assembly (PCBA). The IPC encouraged expression for assembled boards is circuit card assembly (CCA), and for assembled backplanes it is backplane assemblies. The term PCB is used informally for both bare and assembled boards.


What exactly is printed circuit board (PCB)?

A PCB mechanically supports and electrically links electronic components by using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate. Essential components – capacitors, resistors or active devices – are typically embedded on the PCB. Progressed PCBs may contain components built-in in the substrate.

Actually, PCBs can be single sided (a single copper layer), double sided (2 copper layers) or multi-layer (outside and inside layers). Conductors on different layers are linked with vias. Multi-layer PCBs accommodate greater component density.

FR-4 glass epoxy is the foremost insulating substrate. A basic building block of the PCB is an FR-4 panel with a thin layer of copper foil laminated to one or both sides. In multi-layer boards, several layers of material are laminated together.

Printed circuit boards are put to use in virtually the least difficult electronic devices. Substitutes to PCBs involve wire wrap and point-to-point construction. PCBs need the additional design endeavor to lie down the circuit, but producing and also assembly can be automatic. Producing circuits with PCBs is less expensive and quicker than using alternative wiring methods simply because components are usually mounted and wired with one single part. Besides, operator wiring mistakes are taken off.

Circuit Card Assembly Service Providers

FASTBOM offers a great deal of Electronics Manufacturing Services (EMS) for business customers. The company focuses on high-mix, low-quantity engagements and is able to deal with many different projects, from single prototypes to massive scale production runs. A number of main firms have started to trust FASTBOM for quick, on-time supply of different types of projects.

Circuit Card Fabrication & Assembly Service: Making a single prototype to large-scale production runs or through-hole to mixed technologies, we offer the mobility to match practically any Circuit Card Assembly (CCA) specifications.


Interesting Specifics Of PCB Boards That You Probably Don’t Understand

Share This:

Interesting Specifics Of PCB Boards That You Probably Don’t Understand

It was in the year 1936 that PCB boards were first created and showcased . They have developed over time ever since then; staying smaller, faster and significantly more efficient to build when compared to the past days. On the other hand, PCB assembly technology never ever stays static that is, it’s always progressing. Did you know that we will certainly come to apply biodegradable PCB Boards before long?  Let me explain to you the next quite a few facts on printed circuit cards!

PCB Boards Are Generally Of Any Colour (Not Merely Green)

The color that we basically observe in the largest part of PCB boards is of the solder-mask that shows via the glass. There’re of course a couple of theories relating to for what reason the iconic dark green color is essentially utilised in PCB production.

The color is known to be the regulation standard for PCB boards when they were being employed by the US military and it spread (to the remaining of the whole world) exactly like that.
Green may also have been the color of original solder-mask resins and that the color is employed nowadays merely on the theory of tradition.
The truth is, green is mainly employed in the manufacture of circuit boards for the reason that manuacturers believe that it is quicker to hunt for defects in trace lines.

PCB Boards Are Around The Globe

Printed circuit boards may be located all around us. You’re probably within just reaching distance of one right this moment, to illustrate. if you’re reading this article on a tablet PC or possibly on your desktop computer! When using electronics, we generally don’t recognise exactly how everywhere circuit boards may be or the need for PCB boards in cutting-edge tech.

PCB Boards Are Designed Utilizing CAD

CAD ( also known as computer aided design) is normally utilized by makers while designing printed circuit boards. This permits for an nearly seamless and accurate process where technicians work with CAD software and design the schematic plus the layout of PCB boards. This helps in checking the board before you make them in physical form.

PCB Boards Take Advantage of SMT (Surface Mount Technique)

SMT is the most often employed production technique in the manufacturing of modern-day PCB Boards. This procedure very first became popular in the 1980s, going so far as to change the through-hole process (its predecessor, also known as THP).


The main reason for this type of quick adoption of surface mount technology was that the past technique was not merely too gradual and also caused a lot of errors in manufacture of PCB Boards.

PCB Boards Apply Traces Instead of Wires


Gadgets use wire connections as a standard way of transmitting energy and electric current. PCB boards are yet an exclusion to this! As opposed to using wires, a printed circuit board takes advantage of copper traces that send electrons. This enables PCB Boards to be scaled-down in space, for the reason that flat traces do not need a great deal of room.

PCB Boards Employ Plenty of Potential Components

It may be small in proportions but a PCB makes use of a large number of components, all of these have their unique individual properties. The list of components involves (but isn’t tied to);

  1. Resistors
  2. Capacitors
  3. Potentiometers
  4. Relays
  5. Inductors
  6. Fuses
  7. Battery packs
  8. Diodes
  9. Transistors
  10. Transformers

PCB Boards Are Allowed To Be Completely Customized

FASTBOM offers their customers with the chance to order personalized circuit boards, that is, boards produced as per their own requirements and specifications. On top of that, the PCB fabrication house even offers testing services to clients. While there isn’t any desire to order custom PCB Boards (they are generally highly-priced too), sometimes it helps to make a product perform a lot better than what a standard PCB could give you.


What Can Cause PCB Breakdown?

Share This:

What Can Cause PCB Breakdown?

Printed circuit boards are definitely the powerful forces building the central of each and every thing that we use ordinarily – whether it’s smart cell phones, control panels for industrial appliances, or the displays. With this being noticed, when a PCB doesn’t do the job , it disrupts our personal and professional lives considerably.

The triggers for printed circuit board failure can in most cases be associated to 1 of 2 points:

  1. operational issues because of environmental difficulties,
  2. operational issues arising from the design and construction stage of the PCB

Every once in awhile, all these issues take place upon several years of usage, and at times, the problems have been accidentally inserted into the board at the time of PCB fabrication, bringing about it to fail considerably before its first use. On the plus side, as a consequence of the physicality of the printed circuit boards, most failures of the PCBs can be mended.


Environmental Problems

Environment-related issues grow when a PCB is out in the open to stuff or environments that impact on its functioning. Temperature, debris, and moisture are the most wide-ranging factors that discourage performance, however, unexpected affects (such as falling, release of electrostatic, collapsing, etc) or supply of spare power from lightning or power rush may also be brutally damaging to your PCBs.

Do not forget: even if it’s just the most expertly crafted pcb can stand strong against an electro-mechanical fire breakout! What’s more, rudiments such as dirt are also able to ruin your board progressively, oxidizing it and effecting its lifetime. In addition,, critically high temperatures, quite common on production grounds, are also able to harm its parts.

Commonly, a majority of these hassles (such as a scorched part) can be discovered very easily. Still, in the event your board is going down hill and the key issue is still unknown, realize that it needs instant testing using detective hardware to address the concern.



Making Problems

Frequently, human ineffectiveness is the origin of all of the PCB manufacturing concerns. From misinterpreting a diagram to incorrectly labeling a component, you can find an non stop number of issues which can grow at a point in the design and producing stages of PCB production.  Listed below is a fast summary of a few common and normal PCB fabrication issues: components installed poorly or inaccurately placed:

Result in soldering giving you vulnerable solder joints;

Unacceptable thickness of the board at some point bringing about it to flex or bust;

Small padding of traces ending in a voltage sweep, can be quite a possible reason for a burnt board;

Traces and paths by accident placed closely to each other, bringing about short circuit;

Improper link between the layers of board bringing about unfullfiling functioning;

If you aspire to obtain printed circuits boards which are good quality and have been examined for functioning and endurance, you have come to the right place. We have the top PCB prototypes and a fantastic history as PCB maker and shop. Have a look at us and the solutions we give you.


An easier way to mine gold from used electronic devices now

Share This:


An easier way to mine gold from used electronic devices
Whenever you dispose of a well used mobile phone or tablet PC, you likely will take away your important data from it, however , how about the useful resources – for instance gold – that it is made up of?

Obviously, these kinds of materials are extremely challenging for customers to get back, which may be the reason why, as stated by the Fastbom , approximately 7 % of the globe’s gold supply is now fixed within electronic devices. While extracting that gold has been a very harmful and unproductive proposition in the past, experts at present believe that a brand new process will definitely make prospecting for gold in electronic devices waste more possible than ever before.

Gold is usually seen on PC boards, especially under keyboards at which its longevity is definitely an edge. Based on the research workers, approximately 300 tonnes of the metal are used in electronic devices annually.

The new way to take it away uses a mild acid instead of harsher chemical substances just like cyanide or mercury which are at present utilized to draw out gold.

To begin with, PC boards are dissolved in the acid that turns all the metal in the PC board to fluid. After that, an oily solvent made out of toluene is put in, starting a process referred to as solvent extraction. Toluene is an aromatic hydrocarbon quite often used in coating thinners. The toluene solvent pulls the gold free of the other substances in the acid wash where the metal can be restored and recycled. Similarly, the solvent and acid could be re-cycled, reducing waste material.

The solvent extraction process is excellent for the reason that the reusing of reagents & acid are integral to the process and it could be a possibility to take out other precious metals utilizing the process.

As soon as you have got dissolved metals in acid solution, you may use solvent extraction to split up every one of them. Therefore, in theory, we’re able to develop a process that could be capable to split all the valuable metals in electronic waste materials, which obviously can have ecological and possibly financial rewards, however, this would rely on the selling prices of metals and the expense of the process.


Gionee S6 Pro Steel-Dressed Mobile phone Having 4Gigabyte of RAM Launched

Share This:

Gionee S6 Pro Steel-Dressed Mobile phone Having 4Gigabyte of RAM Launched


  • S6 Pro features a fingerprint scanning device set on the home button.
  • It includes a USB Type-C port.
  • It runs Amigo 3.2 OS as outlined by Android 6.0 Marshmallow.

Gionee S6-pro-3

Gionee has announced its new S6 Pro mobile phone in China. Charging ¥ 1,999 (approx . Rs. 20,000 availabe on 711Gear), the Gionee S6 Pro is currently available to buy from the company’s online website in China. The firm has up to now not unveiled any opportunity ideas towards the handset outside China.

The metallic-clad Gionee S6 Pro features finger marks scanner which is actually inlayed on the home control as well as the corporation touts that it can open up the smartphone within simply 0.1 seconds. One more focus with the mobile is that it comes along with USB Type-C charging slot.

Operating Amigo 3.2 OS determined by Android 6.0 Marshmallow, the Gionee S6 Pro has dual-Sim card (Micro + Nano) support. The second SIM port also doubles as the sd card slot.

5.5-inch full HD Display

It comes with a 5.5 ” full-HD (1080×1920 pixels) IPS display screen and under-the-hood has a 64-bit 8-core Helio P10 MT6755m CPU which is 1.8GHz, put with 4GB of RamRam memory.

The Gionee S6 Pro includes a 13-mega-pixel autofocus rear cam with LED flash plus a 5-megapixel front-facing camera. It offers functions which include night time mode, surroundings mode, rush mode, miraculous concentration, HDR, GIF and much more. Full-HD resolution video recording is also contained. The smart phone houses 64Gigabyte of inbuilt storage space. The inbuilt storage can be improved through microSD card (nearly 128GB).

The metal mobile phone is supported by a 3130mAh power supply, which can be rated to produce approximately 39 hours with talk-time and standby time of as much as 558 hours. The S6 Pro’s interaction selections contain Bluetooth 4.0, Wi-Fi 802.11 b/g/n, Wi-Fi Hotspot, GPS, 4G LTE (as well as Band 40 and VoLTE), USB OTG and USB Type-C. It measures 153×75.2×7.6mm and weighs in at 170 grams.

It has detectors such as proximity detector, accelerometer, magnetometer, ambient light sensor, movement sensor, and gyroscope. The smart phone is for sale in Gold, Rose Gold, and Silver colour variants.

« Older posts
Elephone P9000 for sale